Process Indicators & Totalizers

Process Indicators & Totalizers 2017-03-30T20:13:17+00:00

Process Indicators

408-2IN Large Display Indicator

It has 230/110VAC power supply and built-in transmitter supply. This model is packaged in MS powder coated enclosure which makes it rugged and reliable. Features of 408-2IN Process Indicator 8 input options (TC, RTD, mA, V) Large 4-digit…

408-M Digital Indicator

It is a low cost high performance indicator which offers high accuracy of ±0.25% of full scale. This model can be used for Pt 100, five different types of thermocouples and four types of linear inputs. 408-M is easy to operate and configuration …

409 Indicator

It can be interfaced with SCADA/PLC using optional RS485 communication and analog retransmission output for process automation. It has two-way communication facility allowing user to read and write PV over Modbus between any Master device and Indicator….

409-4IN Large Display Indicator

It can be interfaced with SCADA/PLC using optional RS485 communication and analog retransmission output for process automation. It has two-way communication facility allowing user to read and write PV over Modbus between any Master device and Indicator….

LC5296-DC Dual Channel Indicator Cum Controller

LC-5296-DC is available with dual 0.56” Red 7 segment LED display for process value. It accepts RTD/ mA/ Volt input and provides two relay outputs to perform various control and alarm functions. Intuitive configurations with four front tactile k…

LI4248 Compact Indicator

Alarm can be configured on two individually programmable relays; alarm status is indicated on front LEDs. This model is available with both SMPS and 24VDC power supply option. Features Universal input (TC, RTD, Volts) 4-digit 0.56” L…

Bar Graph Indicators

40005E Bar Graph Indicator

Communication 40005E comes with one RS485 port as a standard, a second RS485 port and/or a Ethernet Port are options to enhance the communication capabilities of the unit and use it as an RTU, controller or protection device for parameters …

Flow Indicator Totalizer

1006H 6-Digit Flow Counter / Indicator / Totalizer

Model 1006H FIT is equipped with additional features like transmitter power supply to excite field transmitter, Isolated retransmission output for recorder and It has optional serial communication on RS485 over MODBUS RTU protocol for interfacing…

1008S 8-Digit Flow Indicator / Totaliser

Model-1008S has four optional relays and four digital inputs to configure simple flow batching operations with High/Low, Pre warn or End of process set points. It can be interfaced with SCADA/PLC using RS485 communication and analog retransmission…

Loop Powered Indicators

LPI-1 Loop Powered Indicators

The indication range can be easily scaled by 3 front pushbuttons, the scale can be set to any range between -1999 to 9999 for 4-20mA input, and reverse scaling is also possible. Featuresof LPI-1 Loop Powered Indicator 4-Digit LED or LCD…

Flame Proof Indicators

LPI-1-XP Flame Proof Loop Powered Indicator

The indication range can be easily scaled by 3 pushbuttons inside , the scale can be set to any range between -1999 to 9999 for 4-20mA input, and reverse scaling is also possible. The display is factory oriented for horizontal or vertical mounting…

​​LC5296-XP & LC5296-XP-I FLP Controller & Indicator

Model LC5296-XP incorporates easy to read 4 digit displays for PV (0.56” display size) and SV(0.4” display size), brightness of which is user adjustable, the unit can be configured for any TC, Pt-100 or Volts and comes with two relay output as sta…