Masibus Analog Input Field Interface Board has 8 channels that accepts various types of current/voltage signals and converts them to isolated current/voltage signals. It is compact universal DIN rail mounted with labeled input and output connections. Each channel zero and span calibration is adjustable by multi-turn potentiometers.
It is compatible with both 2 wire and 4 wire transmitters and has built-in transmitter power supply to power 2 Wire field transmitters.
Offers excellent accuracy and stability for reliable operation in hostile environments and offers full 3 port isolation between input, output and power supply.
- Eliminate Ground Loop problems
- Protect Expensive control systems against Field Faults
- Isolate and Translate Field Signals
- Eliminate Common Mode Voltages
- Field Interface for PLC/DCS/SCADA systems
|No of channels:||8 No of Channels|
|Input & Output Type:||DC Volt/Current (Factory Set)|
|Input Indication:||Input over/under range Indication (1-5V/4-20mAonly)|
|I/P Connection:||PCB Terminal Block accepts 2.5mm2 conductor size|
|Accuracy:||0.1% of Span|
|Output Terminals:||PCB Terminal Block or 25 pin D-Type connector|
|Power Supply:||24VDC ±10%|
|Power Supply Protection:||By Fuse|
|Power Supply Status Indication:||Healthy and Fault Indication|
|1.5KV AC Input to Power, Channel to Channel, Input to Output and Output to Power|
|Dimension (mm):||225(L) x 90(W) x 90(D)|
|Weight (gms):||Appx. 450 gms|