Vibration Monitoring & Predictive Maintenance

Vibration Monitoring & Predictive Maintenance 2017-03-30T20:44:37+00:00

Online Vibration Monitoring

409-S RPM Monitor

409-S RPM comes with 2 set points and relay outputs for Alarm and Trip purpose, the set points and relay logic can be user set for over speed/under speed Alarming and protection, the unit has built-in acknowledge logic for maintained as well as…

Online Balancing System

Features Masibus offers Online Balancing System of Hofmann. Hofmann is considered the world leader in numerous balancing applications, Hofmann has designed and produced balancing systems for over 80 years. Hofmann expertise is integrated into solutions…

Online Vibration Monitoring System

Features Periodic monitoring provides a good solution for Balance of Plant machinery. This is because of the large number of points to be monitored each month. Too many to have continuous monitoring on all of them! Still, online vibration monitoring…

VMS-4SE Multichannel Vibration Monitor

Modular and Expandable VMS4SE is modular in architecture and Expandable, I/O slots can accommodate a mix of Vibration Input, Analog Input, Open collector output or Relay output. All field inputs are wired by Pre-Fab cables direct into panel terminals….

VSW-150 Vibration Switch

The Vibration Switch is well equipped for rotating machine protection applications. It offers bright 3½ digit display, precise 4-20mA analog output and one relay output with status indicator resulting in three-in-one product. Set point setting …

VSW-160 Flame Proof Vibration Switch

The Vibration Switch is well equipped for rotating machine protection applications. It offers bright 3½ digit display, precise 4-20mA analog output and one relay output with status indicator resulting in three-in-one product. Set point setting …

VT7S10 Vibration Transmitter

Masibus’ Model VT7S10 Vibration Transmitter is an innovative product that excites and reads signal from high temperature accelerometer and transmits overall vibration value with 4-20mA on loop power. It provides output for essential continuous…

VT7S12E Dual Channel Vibration Transmitter

VT7S12E is the most advanced & Compact Vibration Transmitter. It accepts input directly from ICP type Accelerometer, processes the signal and gives analog output in the form of standard current or voltage; the vibration measurement range…

Portable Vibration Monitoring

CA200 Vibration Calibrator

Benefits Increase reliability in measurements and analysis Routine calibration of sensors and associated instrumentation is recommended to improve confidence in measurement accuracy and acquired data. Application This equipment…

MI2100 Mini Balancer

Frequency range rolling bearing condition 5 – 50 kHz Display Range 0 – 2,000mm/s, μm, mils Excellent cost / performance ratio Applications Measuring overall vibration Measuring unbalance vibrations Balancing in production …

VIBER X1 – Vibration Meter

Interchangeable accelerometer and cable provides economy and safety because it can easily be replace if something breaks and that you do not need to be close to rotating parts. Clear LED indication displays the frequency range that is selected. Charger,…

VIBER X2 – Vibration Meter

Measurement units and measurement presentation may be selected by the user from the following list: g-value = (RMS, Peak or Peak-Peak) a = m/s² (RMS, Peak or Peak-Peak) V = mm/sec (RMS, Peak or Peak-Peak) V = inch/sec (RMS, Peak …

VIBER X3 – Vibration Meter

Viber X5 Vibration Analyzer

Applications Fault frequency calculations for bearings, Gear boxes, Belt drives, Unbalances, misalignment, Electrical motor faults

Vibrometer – MC 1100

Frequency range – Vibration velocity: 1-1,000/10-1,000/10-10,000 Hz Rolling bearing condition: 5 to 50 kHz Belt frequency: 10 to 1,000 Hz Measuring temperature (Option) Check of belt tension (Option) Applications…

VL 8000 Vibrolyzer

Applications Measuring vibrations on bearing and machine housings Recording the condition of roller bearings Observing and recording vibration data Analysing frequencies of a vibration (FFT) Evaluating resonance frequencies and…

VM908 Vibration Meter

Vibration meter is a strategic tool for predictive maintenance. It measures off line vibration and provides easy evaluation of health of machines. On this basis further analysis can be done using vibration analyzer for diagnosing the machine…

X-Viber Vibration Analyzer

Benefits Selectable Measuring unit, Frequency range Options of Data Logging Single plane balancing with the 3-point method Single plane balancing with the vector method Amplitude and phase measurements Higher availability,…

Predictive Diagnostics

Thermography Services

Infrared thermography is the analysis of thermal information by using non-contact thermal imaging devices. Infrared Thermography is used to detect hotspots, heat loss, leaks, insulation defects etc. so that maintenance personnel can take appropriate action…

Vibration Sensors

Contact type Vibration Sensors

VS125 Loop Powered Sensor Premium General Purpose Industrial Piezoelectric Vibration Sensors with 4-20mA piezoelectric vibration sensors are design to monitor the vibration in harsh industrial environment. It uses the industry standard 4-20mA loop…

Non-contact type Vibration Sensors

MDS10/MDT10 Proximity Sensor/Transducer The probe housing is made of stainless steel and the probe cable is concentric with PTFE isolation. The most common use is for shaft position and relative vibration measurement on rotating machinery. The…