Posted on / by admin / in Frequently Asked Questions

Mint FAQ

For any product or application related question just type here ?

Mint FAQ

No, all are separate modules for DI – DO – AO – AI

Yes. all 16 digital inputs have 32 bit counters with UP/Down counting feature. and it also supports storage of counters during power OFF. so values are retained

15 Modbus Slave devices can connect on RS-485 Master Port. Two RS-485 ports available. one port active at a time

All Standard MINT IOs are having 2 RS485 Modbus RTU Slave available. Ethernet model having one MODBUS TCP/IP port and one RS485 MODBUS RTU slave port available

0/4-20mA and 0/2- 10VDC outputs are available. both models are separate models.

MINT-AO-I

MINT-AO-V

Yes. only in Current and Voltage Inputs. -2000 to 20000 Counts

Outdoor range- Clear Line Of Site without Obstacles > 1Km

Upto 256. 247 IOs with 8 Repeaters after every 31 MINT IOs in a single RS-485 loop

120 ohm Termination resistor is available via switch selection on the front of IO.

Switch No. 9 for RS-485 Port-1/Switch No.10 for RS-485 Port-2

No but 3 Ports Isolation is available. 1500 VAC for 1 Min

1> Power Supply to Field IO

2> Power supply to Communication Ports

3> Communication Ports to Field IO signals

No but 3 Ports Isolation is available. 1500 VAC for 1 Min

1> Power Supply to Field IO

2> Power supply to Communication Ports

3> Communication Ports to Field IO signals

Source and sink both types of Open collector Outputs are available. Its Factory Set.

We’d love to hear from you to discuss Automation Process, Services, Training or to hear your new idea.