8 Channel Analog Input Module MAS-AI-08-D
8 Channel Analog Input Module MAS-AI-08-D
Masibus Analog Input Field Interface Board has 8 channels that accepts various types of current/voltage signals and converts them to isolated current/voltage signals. It is compact universal DIN rail mounted with labeled input and output connections. Each channel zero and span calibration is adjustable by multi-turn potentiometers.
It is compatible with both 2 wire and 4 wire transmitters and has built-in transmitter power supply to power 2 Wire field transmitters.
Offers excellent accuracy and stability for reliable operation in hostile environments and offers full 3 port isolation between input, output and power supply.
Input | |
No of channels: | 8 No of Channels |
Input & Output Type: | DC Volt/Current (Factory Set) |
Input Indication: | Input over/under range Indication (1-5V/4-20mAonly) |
I/P Connection: | PCB Terminal Block accepts 2.5mm2 conductor size |
Output | |
Accuracy: | 0.1% of Span |
Output Terminals: | PCB Terminal Block or 25 pin D-Type connector |
Power Supply | |
Power Supply: | 24VDC ±10% |
Power Supply Protection: | By Fuse |
Power Supply Status Indication: | Healthy and Fault Indication |
Isolation | |
1.5KV AC Input to Power, Channel to Channel, Input to Output and Output to Power | |
Physical | |
Dimension (mm): | 225(L) x 90(W) x 90(D) |
Weight (gms): | Appx. 450 gms |
- Eliminate Ground Loop problems
- Protect Expensive control systems against Field Faults
- Isolate and Translate Field Signals
- Eliminate Common Mode Voltages
- Field Interface for PLC/DCS/SCADA systems